L3 – Set a connection with PLC In this topic, you will learn:1. How to add a PLC driver into the project.2. How to check your PLC setting is correct.3. How to simulate your project running on the PC with PLC https://youtu.be/jU1ky72WdoE
L3 – Set a connection with PLC Read More »
L2 – Create a simple project In this topic, you will learn:1. Create a simple project with Toggle object.2. Check the function with off-line simulation.3. Download project to HMI and monitor HMI screen. https://youtu.be/LU9At3ax2sc
L2 – Create a simple project Read More »
L1 – Download a project by USB/SD card In this topic, you will learn:1. How to build USB drive/SD card download data2. How to download project by USB drive/SD card3. How to upload project by USB drive/SD card https://youtu.be/hV_EamYnN3U
L1 – Download a project by USB/SD card Read More »
EasySystemSettings Do you wish to hide HMI system settings menu, but worry about the need for changing the settings afterward? Do you consider setting the HMIs one by one a time consuming and tiring job, especially when handling a large number of units? EasySystemSetting editing tool can save you all the trouble! EasySystemSetting editing tool allows pre-configuring
Easy System Settings Read More »
Trend Display – Y Scale Control EasyBuilder Pro adds Y-scale feature in Trend Display object. The Y-scales can be shown or hidden, and the order or range of Y-scales can be changed dynamically on HMI. Overview: 1. Display/Hide Y-scale of each channel, respectively.  2. Change the order of Y-scale of each channel.  3. Change
Trend Display – Y Scale Control Read More »
Display Object Address In EasyBuilder Pro, It is now possible to display object addresses in the project editing screen. This will allow the user to find the right object in an instant, thus saving plenty of time during the project development phase and allow user to print the editing screen as reference document. Example: In the
Display Object Address Read More »
GE Fanuc SNP-X-SNP ID EasyBuilder Pro adds SNP ID feature in GE Fanuc SNP-X driver for RS-485 multi-drop communication. The SNP ID in GE Fanuc can be set to represent PLC station number (0~254), adding possibility to multi-drop communication via RS-485. Example: Formerly, one HMI COM port can only connect one GE Fanuc PLC, and the
GE Fanuc SNP-X-SNP ID Read More »
BACnet COV WithBACnet COV feature, Weintek HMI can be used in any massive node BACnet system, without problem of communication data overflow. The COV function is a BACnet feature which allows each BACnet device/objects changed from passive server to active server. With this feature the HMI don’t have to constantly poll all the node one by
BACnet COV WithBACnet COV feature, Weintek HMI can be used in any massive node BACnet system, without problem of communication data overflow. The COV function is a BACnet feature which allows each BACnet device/objects changed from passive server to active server. With this feature the HMI don’t have to constantly poll all the node one by
Dynamic Drawing Dynamic Drawing object allows you to draw a dot, line, rectangle, or even a circle in a specified region on HMI screen at Run Time. When the drawing is not cleared, new shapes can overlap the previous shapes in the same area, until the maximum number of shapes, which is 1000, is reached. The
PLEASE CHECK BACK SOON!
